Raspberry CentOS 7

Все остальные вопросы
Ответить
Аватара пользователя
KyKyIIIKuH
Сообщения: 268
Зарегистрирован: Ср мар 14, 2018 11:04 am

Raspberry CentOS 7

Сообщение KyKyIIIKuH » Ср май 16, 2018 5:08 pm

Решил провести эксперимент, установил CentOS 7 на Raspberry Pi 3 Model B+
По идее должно встать на архитектуру armv7l

Предисловие:
до того как я начал устанавливать BrainyCP, я установил пакеты wget mc htop NetworkManager-tui, они установились без проблем.

Теперь к делу:
Предварительно я скачал _installCentos_01.sh и не много его подредактировал, чтобы не писало "Your systems is not supported."
После того как прошел пункт "Configure repo", пакеты перестали подтягиваться

Лог установки пакетов с последующей ошибкой.

Код: Выделить всё

[root@localhost Download]# yum -y install NetworkManager NetworkManager-tui NetworkManager-wifi NetworkManager-team
Загружены модули: fastestmirror
Loading mirror speeds from cached hostfile
base                                                                                                    | 3.8 kB  00:00:00     
extras                                                                                                  | 2.9 kB  00:00:00     
http://188.165.154.26/centos/7/armhfp/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Пробуем другое зеркало.
To address this issue please refer to the below wiki article 

https://wiki.centos.org/yum-errors

If above article doesn't help to resolve this issue please use https://bugs.centos.org/.

 One of the configured repositories failed (Brainy Repo el7),
 and yum doesn't have enough cached data to continue. At this point the only                                                   
 safe thing yum can do is fail. There are a few ways to work "fix" this:                                                       
                                                                                                                               
     1. Contact the upstream for the repository and get them to fix the problem.                                               
                                                                                                                               
     2. Reconfigure the baseurl/etc. for the repository, to point to a working                                                 
        upstream. This is most often useful if you are using a newer                                                           
        distribution release than is supported by the repository (and the                                                      
        packages for the previous distribution release still work).                                                            
                                                                                                                               
     3. Run the command with the repository temporarily disabled                                                               
            yum --disablerepo=myrepo-centos ...                                                                                
                                                                                                                               
     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable myrepo-centos
        or
            subscription-manager repos --disable=myrepo-centos

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=myrepo-centos.skip_if_unavailable=true

failure: repodata/repomd.xml from myrepo-centos: [Errno 256] No more mirrors to try.
http://188.165.154.26/centos/7/armhfp/repodata/repomd.xml: [Errno 14] HTTP Error 404 - Not Found
Команда установки
yum clean all && yum install -y wget && bash ./install.sh --package=apache2.4,nginx,php54w,php55w,php56w,php70w,php71w,php72w,bindserver,memcached,ffmpeg,imagemagick,httpry,certbot,megacli,iotop,atop,iftop,logrotate,git,shellinabox,MySql5.6,phpMyAdmin-4.7.0,exim,spamassassin,clamav,proftpd,csf
Лог установки BrainyCP:

Код: Выделить всё

[root@localhost Download]# yum clean all && yum install -y wget && bash ./install.sh --package=apache2.4,nginx,php54w,php55w,php56w,php70w,php71w,php72w,bindserver,memcached,ffmpeg,imagemagick,httpry,certbot,megacli,iotop,atop,iftop,logrotate,git,shellinabox,MySql5.6,phpMyAdmin-4.7.0,exim,spamassassin,clamav,proftpd,csf
Загружены модули: fastestmirror
Сброс источников:base extras updates
Cleaning up everything
Maybe you want: rm -rf /var/cache/yum, to also free up space taken by orphaned data from disabled or removed repos
Загружены модули: fastestmirror
Determining fastest mirrors
base                                                                                                    | 3.8 kB  00:00:00     
extras                                                                                                  | 2.9 kB  00:00:00     
updates                                                                                                 | 2.9 kB  00:00:00     
(1/4): base/7/armhfp/group_gz                                                                           | 155 kB  00:00:00     
(2/4): extras/7/armhfp/primary_db                                                                       |  69 kB  00:00:00     
(3/4): updates/7/armhfp/primary_db                                                                      | 149 kB  00:00:00     
(4/4): base/7/armhfp/primary_db                                                                         | 4.1 MB  00:00:01     
Пакет wget-1.14-15.el7.1.armv7hl уже установлен, и это последняя версия.
Выполнять нечего
Detected OS Version: CentOS
Download install script... [OK] 
Install tools network...   [OK] 

======= Install BRAINY ISP panel ========

======= Setup " apache2.4,nginx,php54w,php55w,php56w,php70w,php71w,php72w,bindserver,memcached,ffmpeg,imagemagick,httpry,certbot,megacli,iotop,atop,iftop,logrotate,git,shellinabox,MySql5.6,phpMyAdmin-4.7.0,exim,spamassassin,clamav,proftpd,csf" ========
Configure process download...  [OK] 
Download version...  [OK] 
Install BrainyCP version 1.07 


Ср май 16 19:14:42 UTC 2018
Disable SELINUX...       [OK] 
Prepare install...       [OK] 
Configure repo...  [OK] 
Version os: 7
Architecture os: armv7l 

Configure limits...  [OK] 
Configure network...  [ERROR] 
Можно ли рассчитывать на поддержку архитектуры armv7l?
Alma Linux 8 - KVM
Текущая версия: 1.0941.20220818
Linux 4.18.0-348.20.1.el8_5.x86_64

Аватара пользователя
eugene
Сообщения: 123
Зарегистрирован: Ср сен 27, 2017 9:58 am

Re: Raspberry CentOS 7

Сообщение eugene » Ср май 16, 2018 8:43 pm

Можно, но чуть позже. По сути нам нужно лишь подготовить пакеты репозитория и все. Но это трудоемко и сейчас имеются другие задачи. Поддержка данной архитектуры обязательно будет

Аватара пользователя
KyKyIIIKuH
Сообщения: 268
Зарегистрирован: Ср мар 14, 2018 11:04 am

Re: Raspberry CentOS 7

Сообщение KyKyIIIKuH » Ср май 16, 2018 8:46 pm

eugene писал(а):
Ср май 16, 2018 8:43 pm
Можно, но чуть позже. По сути нам нужно лишь подготовить пакеты репозитория и все. Но это трудоемко и сейчас имеются другие задачи. Поддержка данной архитектуры обязательно будет
Спасибо за ответ, буду ждать данную возможность
Alma Linux 8 - KVM
Текущая версия: 1.0941.20220818
Linux 4.18.0-348.20.1.el8_5.x86_64

Аватара пользователя
NovEes
Сообщения: 203
Зарегистрирован: Вт окт 17, 2017 2:36 pm
Откуда: г. Москва
Контактная информация:

Re: Raspberry CentOS 7

Сообщение NovEes » Пт май 18, 2018 12:35 pm

Ооооо, малиновые пользователи тоже добрались:)
Welcom too the home:)
С уважением Дмитрий "NovEes" Астахов

freehosting.by
Сообщения: 13
Зарегистрирован: Сб мар 23, 2019 11:21 am

Re: Raspberry CentOS 7

Сообщение freehosting.by » Ср дек 04, 2019 12:40 am

eugene писал(а):
Ср май 16, 2018 8:43 pm
Можно, но чуть позже. По сути нам нужно лишь подготовить пакеты репозитория и все. Но это трудоемко и сейчас имеются другие задачи. Поддержка данной архитектуры обязательно будет
Как успехи с поддержкой Малинок примерно можете подсказать даты когда ждать реализации?

lacoste-sochi
Сообщения: 7
Зарегистрирован: Ср окт 30, 2019 12:55 pm
Откуда: Сочи

Re: Raspberry CentOS 7

Сообщение lacoste-sochi » Ср дек 11, 2019 6:31 am

В этом месяце придет PI 4 (4 gb) AArch64, навеял себе идею запустить серверочек с панелью BrainyCP =)

Отпишусь по результатам.

lacoste-sochi
Сообщения: 7
Зарегистрирован: Ср окт 30, 2019 12:55 pm
Откуда: Сочи

Re: Raspberry CentOS 7

Сообщение lacoste-sochi » Сб янв 11, 2020 6:11 pm

http://mirrors.powernet.com.ru/centos-a ... os/armhfp/ - ссылка на дистр под малинку

Файл называется CentOS-Userland-7-armv7hl-RaspberryPI-Minimal-4-1908-sda.raw.xz

(P.S. логин root пароль centos)


Установилось, все ок...Нооооо

Изображение

Я правильно понимаю, нет поддержки?

Очень жаль ....побегу на другую панель ...
Последний раз редактировалось lacoste-sochi Сб янв 11, 2020 6:17 pm, всего редактировалось 1 раз.

Аватара пользователя
KyKyIIIKuH
Сообщения: 268
Зарегистрирован: Ср мар 14, 2018 11:04 am

Re: Raspberry CentOS 7

Сообщение KyKyIIIKuH » Сб янв 11, 2020 6:12 pm

lacoste-sochi писал(а):
Сб янв 11, 2020 6:11 pm
http://mirrors.powernet.com.ru/centos-a ... os/armhfp/ - ссылка на дистр под малинку

Файл называется CentOS-Userland-7-armv7hl-RaspberryPI-Minimal-4-1908-sda.raw.xz


Установилось, все ок...Нооооо

Изображение

Я правильно понимаю, нет поддержки?

Очень жаль ....побегу на другую панель ...
правильно понимаете
Alma Linux 8 - KVM
Текущая версия: 1.0941.20220818
Linux 4.18.0-348.20.1.el8_5.x86_64

Ответить